How To Install / Flash Firmware on Samsung Galaxy Ace S5830

This Tutorial is about flashing firmware on your Samsung Galaxy Ace S5830. I posted a step by and easy tutorials , please read complete guide once and then apply , if you skip any step then you will have bricked phone.

Disclaimer: Please remember that flashing your mobile phone is fully on your own risk. If the process is interrupted (power failure, disconnected cable, software failure (e.g. with KIES) ) your phone might be very difficult to revive. . Follow this Guide on your risk and if your device gets damaged or bricked during the process, AndroidFlip.com is not responsible

 

(I) Know about everything

There are some things that you may know before flashing firmware on your phone , little bit huge so we separated it here – FAQ about firmware flashing on Samsung androids

(II) Preparing Your phone

1. Go to settings>>applications>>development and enable usb debugging

2. Follow this guide – Preparing your Android phone before upgrading / installing firmware

If you have rooted phone or using any custom ROM Then you will have to clear cache and wipe data which can done by booting your phone in recovery mode and select Wipe data/factory reset and also select wipe cache partition

(III) Download required things

  1. Download ODIN v4.38  – it is a tool that is used to flash firmware on your phone
  2. Drivers – Download and install drivers that are required to detect your phone by pc
  3. Download Firmware for your phone
  4. Download  .OPS File
  5. An Archive (.zip / .rar) file extractor, usually all pc owners have this tool . In case you don’t have any use 7zip archive extractor

(IV) Instructions to Install Firmware on Galaxy Ace S5830

  1. First extract SAMSUNG_USB.rar and install drivers on pc
  2. Extract Firmware files on safe place, you will get some .tar files , please don’t extract .tar files
  3. Run S5570_Odin Multi Downloader v4.38.exe by right click and select run as administrator 

    Run-ODIN-as-admin
  4. Make sure you have Auto Reboot and Protect OPS checked
  5. Click on OPS tab and select the Cooper_v1.0.ops file

    Selecting ops file in odin
  6. Now its time to Select .tar files from firmware folder,  

    =>(A)  If you got three or more files then

    Click on BOOT tab and select file with  APBOOT in the name
    Click on PDA tab and Select .tar file with CODE / PDA in the name
    Click on PHONE tab and Select .tar file with MODEM in the name
    Click on CSC tab and Select .tar file csc / csc-multi in the name
    Leave EFS blank
    (See Image below carefully to understand which files to select)  

    selecting files in odin

    =>(B)  If you got only single files , then 

    Tick One Package from options  and select single .tar file  in one package tab


  7. Switch off your phone
  8. Now boot it in download mode , to do that press & hold volume down and middle key and while holding both press power on key 



    if your phone is unable to boot in download mode don’t proceed to next step ,please try again until it boot in download mode

     

  9. When entered in download mode connect your phone to pc with the help of usb cable
  10. You will see ID:COM section turn yellow and in message boxes “ADDED” appears, that means your phone is ready to start flashing process 

    sign of connecting
  11. Now Click on “START” Button 

    Processing-Update
  12. Do not disconnect the cable or turn off the device, when flashing process will complete you will see a blue pass button , it will reboot when it finishes.

    Updated-Successfully

Congratulations you have successfully installed firmware on your Samsung Galaxy Ace S5830, Now last step left is

(V) Clearing Cache Data

  1. boot your phone in recovery mode ,to do that  press and hold MIDDLE KEY + POWER ON
  2. you will see your phone booted in recovery mode , in recovery mode touch screen will not work so use volume UP and Down navigate through options and MIDDLE KEY to confirm
  3. choose “wipe cache partition” from menu
  4. it will clear the cache data
  5. now select reboot system now

if you faced any problem , feel free to ask it via leaving comments below

Subscribe free email updates

  • Android Tips, Tricks and How-To's
  • Firmware update news and guides
  • Detailed Tutorials on rooting and custom ROM
  • Latest Android phone news and More

Whatcha waiting for?

About kày

Kuldeep Singh is founder of androidflip , young blogger from india who loves to write about android and technology. Follow him on twitter @androidflip

Comments

  1. I have 2 questions.
    1 st.. I have latest firmware 2.3.4. Rooted my phone. Everything
    now one of the benefit of rooted phone is different themes right.. so what kind of themes i can have and from where i could get all those?
    2nd Q I am not able to run NFS shift on my ace.. for installing NFS all the steps i have performed well.. but whwn we start the game the EA logo comes on the screen, bt within a sec we brought to home screen directly… I thought after rooting this issue gets resolved bt its still not working

  2. Crazyinweston says:

    I’ve done this from 2.3.4 XXKPH and afterwards its now a 2.3.3 XWKPT.

    are we sure that this version is better? (than XXKPH)

    thanks.

  3. why i cant do Clearing Cache Data?

  4. Rikos Sora says:

    Hello , this tutorial is very helpful but I’m having a trouble proceeding to download menu, when i press the three buttons toghether my screen is full black and just says “Downloading..” yellow text. I don’t know what to do. Some help please? :)

    • Rikos Sora says:

      Well I am that stupid to not understand that this was actually download mode :D .

      Updated and everything works just fine, great tut ! :)

  5. Rohannaik1992 says:

    it changed my language in something else
    i cant recognize it…
    somebody help

  6. Jamesfong79 says:

    HI, after the upgrade i cant use the phone and got this message “Sorry! The aplication Setup Wizard (process com.sec.android.ugl) has stopped unexpectedly. Please try again.

    What is this mean?

    • That means your firmware doesn’t installed properly

      Try again from beginning

      • Jamesfong79 says:

        Hi, i have been upgrade the phone with 2.3.4 to 2.3.5 few times but none have succeed

        Then i upgrade the 2.3.3 and suceeded with this 2.3.3 to 2.3.5 also succeeded, i don understand this

        By anyway thanks for the 2.3.5

      • Jamesfong79 says:

        But here got problem which the phone sometime will restarted by itself when operated

    • nothing just restart your mobile and clear your wipe and caches..shutdown your mobile once again,then it will works well…me too having same problem after that i trying above things….

      • I had the same problem just a few minutes ago. What I did was to choose “wipe data/factory reset” after selecting “wipe cache partition” and it worked! At first I thought my phone was already bricked but thank God!:D Thanks Kuldeep!

  7. Do i need to off the phone while switch to recovery mode?

    • Yes , switch off your phone then press middle key+power on key together

      • Aldrich003 says:

        hey boss i have upgraded my phone to 2.3.3, i try to upgrade it to 2.3.5 so i follow your instruction above.. i think i had a problem in the last step?.. because when i finished working on that, my android remains in 2.3.3,,, why?…

  8. why i cant extract even my password is corrrecet (samfirmware.com)

  9. Flor Silva says:

    Just started the process but System doesn’t appear iin the window and is already over 5 min and no green bar indicating its doing the update. In the Message window I have:
    Create File …
    StartThread Detected: 1
    StartThread Detected: 0
    StartThread Detected: 0
    StartThread Detected: 0
    StartThread Detected: 0
    StartThread Detected: 0
    StartThread Detected: 0
    StartThread Detected: 0
    setup connection…

    What do I do??

  10. Palash Mathur says:

    In the Download required things

    Download Firmware for your phone from http://www.samfirmware.com/WEBPROTECT-s5830.htm
    there is no firmware for 2.3.5 or XWKS2

  11. Mickael Gauchet says:

    Hi there. How long does it actually take to finish? (from the time it starts download, to the time it reboots…) Mine has been going for almost 30 minutes and doesn’t seem to be getting very far…

  12. Rikos Sora says:

    Great tut , only prob I’m having is that I can’t send/receive 3G data (mobile internet). Is there a way to fix this? Is it because I live in Greece where the update hasn’t official came yet?

    Thanks in advance

  13. is it true that after the upgrade, the screen becomes a little more rough. pixels appear larger…
    thanks..

  14. varun dave says:

    Hey in big trouble……. i was having 2.3.4 and updated as u mentioned… but now after doing that there is only one message on my screen… “Sorry the application setup wizard (process com.sec.android.ugl) has stopped unexpectedly. Please try again… please help

  15. varun dave says:

    hey my phone updated with 2.3.5 but now they are showing something french kind of language…. what to do

  16. Not all Samsung GT i9000 can get into download mode. Without this it is useless.
    Best not to claim it works for every phone

  17. i am getting the com.sec.android.ugl error even when cache wipe is done and reinstalled twice now. HELP!

  18. When resetten to factory defaults (power + home) i got it working again.

  19. Ayushgarg89 says:

    i have updated to android 2.3.4 but i feel like getting back to my previous version android 2.2.1, pls help me to get back to my older version as i feel more comfortable in it..

  20. Dontmailmeover says:

    hi… how long does it take from the time we press the start button for the blue color to appear?? the screen shot says 5.16 but its been 10 mins since I did it!!

  21. Sureshalapati says:

    perfect done with 0% problem

  22. Kberasiya says:

    i upgrade firmware on my samsung galaxy ace but in between cable removed and now while opening the mobile just mono of phone and pc coming i have tried to do it again but same problem coming please help me as my phone is not working

  23. Anyhelp you guys want,just follow me on Twitter.I could help you out with all sorts of problems ! Follow me at @interpid16

  24. my display is in german how to change it in english

  25. do i press reset files in odin after it says pass??

  26. It didn’t worked……i tried 2-3 times installing it.
    Till odin multi downloader installation it was clear
    But after installation my phone kept on restarting

  27. got problem with (process com.sec.android.ugl) and my phone not working at all

  28. I’m stuck at step 6 B=>
    My S5570_Odin Multi Downloader v4.38.exe will stop working after i select the tar. file.
    Please advice.

  29. Followed Corinthians Roman’s advice and worked without problem! Thanks man!

  30. Vergil_lontoc says:

    Im half way through! Problems: Wrong password: (samfirmware.pl) Right pass: (sampro.pl)

    Im nervouss! im just 13 yrs old my mother gonna kill me if its bricked!!

  31. i have KQ5 (INU) firmware, i am having 2.3.4 and now i wnt 2.3.5 so can i have it in my phone ?

  32. Worked like a charm from 2.3.3 to 2.3.5. Went without rooting and backup since got this piece 3 days ago but all the apps stayed…. pleasantly surprised.

  33. Laad_ankit says:

    Thanks alot for the details & download facilities …:)

  34. Fernando De kevin Hayer says:

    i have a question
    my galaxy ace just have android 2.2.1 (froyo)
    can i install android 2.3.5 before i install android 2.3.3 and 2.3.4??
    or first i must install the last android before 2.3.5??
    thanks before…

  35. Vip Innhot says:

    while extracting firmware file of galaxy ace 2.3.5, error occure like wrong password. plz help i tried almost 100 times. plz help bro

  36. Thank you so much my dear friend…

  37. I think I have installed the android 2.3.5 but it came in a strange language I could set my official one that is portuguese but there’s a box in the center of main menu in other language do you know how can I remove it?

  38. Jayson_cute1505 says:

    how to to change swype keypad into 3×4 leypad ?

    Pls help me …

  39. Jayson_cute1505 says:

    how to to change swype keypad into 3×4 keypad in 2.3.5 gingerbread?

    Pls help me …

  40. Jayson_cute1505 says:

    How to change swype keypad into 3×4 keypad in 2.3.5 gingrbread?

    Pls help me,..

  41. hey friend i have Samsung galaxy ace gt 5830 how to install flash player tell me plz
    my id is mkt2880@gmail.com

  42. Hi,

    I have been getting the below Message/log and Com Port Mapping is in yellow color 1 (COM 6)

    Download Start…
    Create File…
    StartThread Detected : 1
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    setup connection…

    Any idea…

    Best Regards,
    khurram_shehzad@live.com

  43. Which firmware to be loaded from this link
    http://www.samfirmware.com/mobile.htm

  44. hay i was successfull …..can we root 2.3.5?? thanx again

  45. Ing Raymundo Ortiz says:

    I have a S5830L of TELCEL from Mexico, I used S5830DDKQ6, and works great!!!! thks a lot.

  46. didn’t get tar. file when extract ..

  47. yh only one file after extract… :(

  48. after extracting it is showing only one file..

  49. oh dear and dear !!!! i am from pakistan i follow these steps to flash 2.3.5 and i dont know what has happened …. i am not able to go to home page …..error comes “THE APPLICATION SETUP WIZARD (process com.sec.android.ugl) has stopped unexpectedly. PLZ TRY AGAIN”

    plz help me

  50. Praveen6867 says:

    hi
    i did all above steps as perfect …
    after complete last step also and reboot my phone …. i am able see the home lock screen when i enter key for lock screen i am getting this below error plz give solution for this error

    Sorry,
    The application Setup wizard( process,sec,android.ugl)has stopped unexpectedly. Please try again .

  51. Marc from Philippines says:

    thanks for this information, successful upgrade.

  52. do i have to erase .md5 to make it .tar file? is that ok??

  53. been trying to update via sing pack thru odin..

    Download Start…
    Create File…
    StartThread Detected : 1
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    setup connection…
    odin mode.. check plcatform verification.
    VerifyPlatform:V0, P0,R0
    START!!!
    set download environment.
    big partition size!!
    big partition size!!
    big partition size!!
    big partition size!!
    big partition size!!
    mibib download..
    1/9 Finished.
    qcsbl download..
    2/9 Finished.
    oemsbl download..
    3/9 Finished.
    amss download..
    4/9 Finished.
    arm11boot download..
    5/9 Finished.
    boot.img download..
    6/9 Finished.
    recovery.img download..
    7/9 Finished.
    system.rfs download..
    its been 45mins not and i think its stuck.. what to do?!

  54. Narasimhha says:

    I AM GETTING THIS MESSAGE

    “The application Setup Wizard(process com.sec.android.ugl) has stopped unexpectedly. Please try again.”
    and a FORCE CLOSE button

  55. ABHISHEK SURESH says:

    thanks man.. thanks a heavy lot.. i had a rebooting problem at first.. but it got solved after making the Factory reset and partition clear from recovery menu.. U rock bro.. keep on posting.. :)

  56. it stucked at COM 13… boot.img download… it’s that way for about 20 minutes, what do I do:(?

  57. thanx..successfully upgrade w/out any problem.

  58. i have got one file only inside the zip file for the boot botton ! no modem ..etc

  59. Rafa_clement says:

    my cellphone doesn’t turn on, because the boot file has been removed and the product doesn’t recognize it… what can I do??

  60. Man.. I’m doing wrong thing when accidentally replace a file in system. Now my ace going crazy when all screen turn black and only top notification bar appear. How can I fix this? Can I reflash using 2.3.5? Is it will replace all system file to new one when flashing to 2.3.5? Please help..

  61. Why only 1 tar file in zip file? I try 2.3.5 only one file in zip. Also 2.2.1 in sammobile got 1 file.. Where can I get file for BOOT PDA PHONE CSC?

  62. hi when i press volume+middle+powe key only appear : emergency Dload Mode (ARM9 mode) only need help please

  63. Hussainjamali says:

    Everythign going fine, just getting message when i am clicking on start,, it says check image files !!!

  64. Amhisham93 says:

    hi i followed all u steps nd installed dis firmware nd on my home screen is not cming

  65. Hey dude its showing
    The application setup (process com.sec.android.ugl) has stopped unexpectedly.
    please try again

  66. I made the update to my galaxy ace s5830, but i am having a message like this: The application setup wizard ( proceess com.sec.android.ugl ) has stopped unexpectedly. Please try again. So please help me, i don´t know how to deal with this….Thanks

  67. Blast_vip says:

    Hi, Im in the step 11 but Odin has 16 minutes downloading… is this normal? or is something wrong? im starting to worry…

  68. odin is not workiing
    it stays like this Download Start…
    Create File…
    StartThread Detected : 1
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    setup connection…

  69. Hi. I follow the links to try and download Gingerbread 2.3.4 DDKQ6 and when i did it downloaded Gingerbread 2.3.4 XXKPH Whats the deal? I already have this version.

  70. it works my galaxy ace updated from 2.3.4 to 2.3.6 ……perfectly works……… :)

  71. Hustlin Hawk says:

    Hi dis is Padmanabh frm Nagpur …
    I hav Samsung Galaxy Ace .. i tried to update my phone to ICS … bt it seems smthing went wrong …wot shld i do ?? the phone is not even starting .. i mean to the homescreen ..
    plz mail me at ‘ hustlin.hawk@gmail.com‘ ASAP ..
    Thanx !

  72. i hav done these steps and now its showing sorry application wizard has stopped unexpectdly. and blank screen plzzz help….

  73. hi…my phone got rebooted before getting a pass message..after rebooting it says” The application Setup wizard (process.com.sec .android.ugl) has stopped unexpectedly. Please try again.

    Then a force close option..Meanwhile Odin was running and after some time got a message as PASS. I cwent for next step and rebooted but same message kep on popuping..Please help..I was having 2.3.3 Firmware

  74. Amittyagi12 says:

    i have done every thing as you told in this article but now my galaxy ace is giving an error”the application set up wizard[process com.sec.android.ugl]has stopped working unexpectedly.Please try again…..what i do

  75. can any how i can increase the ram..?? or the internal storage memory?

  76. Muhibtheone says:

    i install latest firmware 2.3.6 gingerbread on my samsung galaxy ace.how can install apps in my defaut location choose sd card.plz help bro

  77. Shahzad9242 says:

    can i install S5830DDKQ6 on my S5830XXKP8 ?

  78. my fone says application setup wizard has stopped unexpectedly. plz help

  79. Pakeronjay says:

    HELP PLEASE :(
    No automatic rebooting for me. do I need to manually reboot it?

  80. Hiteshkhatwani12345 says:

    Download Start…
    Create File…
    StartThread Detected : 1
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    StartThread Detected : 0
    setup connection…
    odin mode.. check plcatform verification.
    VerifyPlatform:V0, P0,R0
    START!!!
    set download environment.
    big partition size!!
    big partition size!!
    big partition size!!
    big partition size!!
    big partition size!!
    mibib download..
    1/9 Finished.
    qcsbl download..
    2/9 Finished.
    oemsbl download..
    3/9 Finished.
    amss download..
    4/9 Finished.
    arm11boot download..
    5/9 Finished.
    boot.img download..
    6/9 Finished.
    recovery.img download..
    7/9 Finished.
    system.rfs download..
    8/9 Finished.
    csc.rfs download..
    9/9 Finished.
    reset pda..
    Started Timer
    Close serial port and wait until rebooting.

  81. dangerdba says:

    thanks dude. it works

  82. Paulo Aziel says:

    I have a galaxy ace, I did the update using kies. from 2.2.1 to 2.3.3, but version 2.3.3 does not appeal to me because it is very unstable and slow. I want to upgrade or downgrade but the problem is that I don´t find ROM specific to Africa-Mozambique. I wonder if I can use the ROM from another country? like this posted here.

  83. Karansept1 says:

    hey
    how to update firmware 2.3.4 to 2.3.6

  84. will this work if your phone is locked to same carrier eg i buy my galaxy ace prepaid and its with boost mobile does that change anything..will it brick it or somthing like that

  85. will this work if your phone is locked to same carrier eg i buy my galaxy ace prepaid and its with boost mobile does that change anything..will it brick it or somthing like that

  86. Bintuamit says:

    what is best and easy to upgarde at this time for gt 5830

  87. I need help, my phone wont turn up fully, It just stucks on Samsung turning up screen, when the animation ends and it just stays written SAMSUNG, and after few second, the animation repeats, what should I do ? HELP ME, thanx !

  88. hello iv got a problem that when i clicked o ‘start’ in the odin….its stuck on network connection and is not moving on……waiting for ur response

  89. hoping fr a quick response frm u

  90. Aizadqadir says:

    while i was trying it …. it became stuck on big partition size and downlaoding mibib so i disconnected it and now my phone wont start on and is showing an icon of a phone being connected to a computer…i really need ur help regarding this

  91. Indianajones says:

    is there a 4.0 versionfor galaxy ace

  92. ODIN AND .OPS FILE Links Are Not Working Plz Fix It :) thnx

  93. hey i didnt got any ops file i just got my old firmware software how to do t i dono ..
    if i download any other ops file from others can i use it for that software i hav downlaoded for my phone samsung galaxy ace s5830ddkq6

  94. i had been using custom roms before now i want my old version back plz help meeeeeeee

  95. Aidilashraf91 says:

    my SGA is forced to close!!!! how to fix it..arghh!!

  96. mannnn!!!!
    Thanxx a ton !!!!
    It works well nw

  97. Reninjohn says:

    thank youuuuuuuuuuuuuuuuuu

  98. Naveen3807 says:

    no firmware is installed….recovery mode is not coming….only downloading mode is coming…need to install new os…plz help me

  99. Naveen3807 says:

    my mobile does not start at all…plz help…galaxy ace…only downloading mode is coming…no other modes posible…..need to install full firmware..plz help..

  100. Shravan Krishnan says:

    dude, the links don’t work. I’m not able to get odin, the usb drivers, or the .ops files

  101. Dhaval_307 says:

    pls check the download links….
    its not working….

  102. Nipunanayanajithbandara says:

    im trying to upgrade my galaxy ace phone in 4.0..then i install that zip file to sd card.next goto wipe data/Factory reset ,next Wipe cache partition…bt wipe cache portion done not complete. now my phone is not working,not on.how i fixed this phone????

  103. Nipunanayanajithbandara says:

    im trying to upgrade my galaxy ace phone in 4.0..then i install that zip file to sd card.next goto wipe data/Factory reset ,next Wipe cache partition…bt wipe cache portion done not complete. now my phone is not working,not on.how i fixed this phone????

  104. Tom Kanna says:

    my phone is restarting after installing this update ….. what to do ??? pls help me

  105. Epicninja1996 says:

    Just wanted to say thanks alot :) Updated sucessfully NOT UNLOCKED with vodafone UK worked like a charm haha

  106. Dr Rvkotecha says:

    hi i hace updated samsung ace v2.3.4
    I can not reboot properly…I installed superoneclick.zip file…

    but my pc can not run it…
    pl give me that zip file with password…
    & I want to update my samsung ace to v2.3.6
    so if pl send those file also…
    mail me on dr.rvkotecha@gmail.com

  107. when i did everything and want to boot my system for the last time it just keeps going on until the samsung screen and then it wil start over again pleas help

  108. sir the downloadable links were no longer to use. can you retain it back?

  109. help me…my phone still got the message sorry the application samsung home has stopped unexpectedly…help me…i already try all the solution but can’t…

  110. Nivinthomas9 says:

    after updating using kies to ddq8 my phone restarted and it’s not turning on after that
    I have tried to turn on it using the home +power button phone is turning on.
    .any solutions. please help me.

  111. The OPS file not found….Fix that plz

  112. Tushar Malhotra says:

    i had purchased galaxy ace a year back..!!…will this Firmware support it..??
    what can be done in case to retrieve my prev version on Firmware if the flashing is not successful…

    • yes it will work , make sure your phone is galaxy ace s5830. in order to get back previous firmware you have to download previous firmware and flash it using same guide above.

  113. @kuldeep : dude u r really awesome… i almost got my mobile to bricked state… then i did as u said in the comment posts below removed the battery and made my mobile cool for few minutes and then again flashed by odin.. Worked like charm ! you ROCK BRO m/

  114. @kuldeep : bro u got any idea abt how can we change the default blank silhouette contact picture of a gingerbread cuz i’ve seen many changin it to droid bots … ill be pleased if u can help me out with the idea :) thanks in advance :)

  115. Magister Noctis says:

    My Samsung Galaxy Ace keeps on rebooting all the time. If I switch it off, it boots again on its own and keeps on rebooting again. What can I do to fix this ?!?

  116. frE9koUtk1D says:

    what is the password for the firmware? when i tried to extract the firmware using winrar it said that the file is encrypted..
    edited… i just press 12345abcde and it successfully extracted the file..

  117. My galaxy Ace screen shows RAMDUMP Mode (ARM9 mode). What does that mean?

  118. Hey my phone is boot looping after flashing!
    HELP!
    I followed all the steps clearly! Help plz!

  119. Hey you downlode link is not work ,pls help me

  120. Hey how long does a full firmware update take? Because mine has been going for over 40 minutes now? is there a problem?

  121. Respected Sir,
    I am using huawei ascend y200 (U6855-1),as far i remember i was doing something with my clockworkmodrecovery setting and when i rebooted my phone only the logo was shown and the phone hanged.I think i brcked my phone .Please help me in clean reinstalling the OS and its firmware.I stay 282 kms away from the nearest service center.You are my last hope and this is my first phone.

  122. please i do what you told us to do its take 30 min now and the odin dont moved what can i do i used one package help me

  123. hey bro flashingy ace has passed more than one hour what should i do
    should i disconnect it and stop
    or let it flash

  124. it’s not working

Trackbacks

  1. [...] flashen wollen und da ist was nicht in ordnung, ich habe genau wie hier nach anweisung gemacht. http://androidflip.com/how-to-instal…axy-ace-s5830/ Ich habe das handy ausgeschaltet und dann mit volume nach unten, Button und power knopf [...]

  2. [...] your region. Read about it here. Read everything it has to say, most importantly the preparations: How To Install / Flash Firmware on Samsung Galaxy Ace S5830 After you install your correct ROM, try the CSC method and see if you could change to your [...]

Speak Your Mind

*